NivelPro Reusable Tile Leveling Spacers, 50-Piece Alignment Kit

Get a smooth, even finish across your tiles with no raised edges. The NivelPro reusable tile leveling spacers use a T-pin-and-clip design to keep neighbouring tiles at precisely one height as the adhesive beneath cures. Fifty spacers come in the pack along with a dedicated wrench, and they suit tiles from 3mm to 25mm thick (about 0.1" to 1") with joint gaps of at least 2mm (0.08"), so one set handles most standard floor and wall jobs.

Main features

• Made to be used again, not thrown away — use the supplied wrench to undo the adjusting cover, and the spacer detaches, ready for your next job.
• Stops tiles from moving while the adhesive cures — the T-pin holds both tiles in one plane, so nothing settles unevenly overnight.
• Suitable for floors and walls — the same clip copes with horizontal and vertical tile runs, across a thickness range of 3mm–25mm (0.1"–1").

How it works

• Place the first tile, leaving a seam of at least 2mm (0.08"), then position the second tile next to it.
• Push the T-pin into the seam and turn it a quarter turn so that it locks beneath both tiles.
• Rotate the adjusting cover until both tiles are flush and level.
• Before the adhesive has fully set, typically within about 6 hours, unscrew the adjusting cover in the opposite direction.
• Turn the T-pin one more quarter turn so it rests flat on the tile, then remove the leveller.
• Wipe each piece clean and store it dry for your next job.

Technical details

FAQs

Can the spacers be used for several jobs?
Yes — once the adjusting cover is undone with the wrench, each spacer comes away clean and dry, ready for reuse.

Do they suit wall tiles as well as floor tiles?
Yes, one clip and T-pin system suits horizontal floor runs as well as vertical wall installations.

Which tile thicknesses does the kit support?
Any thickness from 3mm to 25mm (about 0.1" to 1"), with a joint gap of at least 2mm (0.08").

How quickly must I take them off?
Take them off before the adhesive hardens completely, which is usually within about 6 hours. Ease the cover back, free the T-pin and take the spacer off.

Shipping is free on every order with no minimum spend, and you have 30 days to return the kit if it doesn't suit your job. Real human support is at .